Coffee Pro M100 Coffee Particle Sizing Kit


Available on backorder


Coffee pro professional sieve analysis kit for coffee grind analysis and bean grading. The new Coffee Pro Portable Sieve Analysis Kit includes the worlds first truly portable laboratory grade sieve shaker, designed for use in the field. Equipped with a full set of Endecotts Certified Brass Grind Analysis Sieves in ASTM Designations #12, #16, #20, #30, #40, #50, along with receiving pan and lid, all neatly packed in a hard plastic carrying case.

  • Maintenance Free
  • electromagnetic Vibration
  • antivibration Feet
  • 0-60 Minute Timer
  • variable Amplitude
  • simple Clamping System
  • accomodates 3″ Sieves Or 200 Mm For European Use

This popular grind distribution chart shows the optimal percentage of grinds to be retained on each of the sieves listed, for each of the brew types, according to research done by the coffee brewing institute, and later revised by MPE in Chicago. Other studies suggest it is important to ensure that the fines (Amount passing the # 50 sieve) do not exceed 20percent, because amounts over that have been found to produce a bitter taste. Whetever the case, the particle size distribution of the finished ground coffee will have a significant bearing on the taste, because as the grind size is reduced, the relative surface area of the grinds is increased. Smaller grinds require less contact time with water to achieve optimal extractions. This is why Espresso has such a relatively short contact time. As the burrs on a grinder wear out, the particle size distribution will change, as will the characteristics of the final product, unless a grind analysis program is instituted. Grind analysis as a quality control measure in remote locations like cafes, has always been a problem without a solution. Hand shakers are difficult to operate, and inaccurate. Standard sieve shakers weigh hundreds of pounds, or are too bulky to tote around. The M100 Sieve Shaker is a laboratory grade sieve shaker, utilizing an electro-magnetic motor to provide agitation. The amplitude may be varied, as well as the cycle time, helping to ensure accurate particle size analysis.

  • Dimensions: 26cm x 16 cm x 32cm
  • Case dimensions: 19″ x 17″ x 8″
  • Weight: 11kg
  • Power Supply: 230V/50HZ or 115V/60HZ


There are no reviews yet.

Be the first to review “Coffee Pro M100 Coffee Particle Sizing Kit”